Specifications - Laerdal SimBaby Mode D'emploi

Specifications

Size and Weight
Dimensions 650 mm x 23 mm x 160 mm
(25.59 in x 0.91 in x 6.30 in)
Weight 4 kg (8.8 lbs)
Power Consumption
Link Box and simulator Input
Link Box and Simulator Output
Compressor Unit Input
Compressor Unit Output
Air & CO Pressure
2
External air connection
External CO to Patient Simulator
2
Temperature Limits
Operating temperatures 10 ºC to 40 ºC (50 ºF to 104 ºF)
Storage temperatures -15 ºC to 50 ºC (5 ºF to 122 ºF)
Environment - Patient Simulator Only
Relative humidity 15% to 90% (non-condensing)
For indoor use only
Material Chart for Patient Simulator
Clothes Cotton, Nylon
Skins and airways PVC (DEHP free)
External hard plastics PP, PA, PC, PC/PET
Inner plastics Silicone, TPU, TPE, PVC, Nitrile PA, PA+GF,
PC, ABS, POM, HDPE, PET
Metal components Aluminum, Brass, Steel
Recommended Hardware Specifications
Intel i-core generation 3 or newer
Score over 3000 PassMark - CPU Mark
4 GB RAM
120 GB hard disk space
1366x768 or better
Headset w/microphone
USB ports – 2
Minimum Software Requirements
Windows 7 or Windows 8
100% DPI
Acceptable Fluids for Patient Simulator
To clean the simulator's fluid and blood system use one of the
following:
Distilled water or De-ionized water
Cleaning Fluids 60% - 70% Isopropanol
SPECIFICATIONS
110/230V AC 1.4A
12V DC 5.0A
110V AC 1.9A
230V AC 1.0A
Max 1.4 bar
Max 1.4 bar
Simulated IV Fluids
Only use purified water to simulate IV fluids:
Simulated IV fluids - Distilled Water
- De-ionized Water
Link Box
Dimensions
Operating temperature
Storage temperature
Humidity
7
2.4 kg (5.3 lbs)
210 mm x 100 mm x 220 mm
(8.27 in x 3.94 in x 8.66 in)
10 ºC to 40 ºC (50 ºF to 104 ºF)
-15 ºC to 50 ºC (5 ºF to 122 ºF)
15% to 90% RH (non-condensing)