Attachment Of Blood Pressure Cuff To Arm; Care And Maintenance - Laerdal VitalSim Mode D'emploi

Attachment of Blood Pressure Cuff to Arm –
a. Place supplied Blood Pressure Cuff on arm.
b.Attach clear tubing on cuff to clear tube attached to arm. (Photo 2)
Photo 2
See VitalSim Directions for Use for complete Blood Pressure
operating procedures.
Laerdal Recommends
Do not insert needles into blood pressure arm.
See VitalSim Directions for Use for additional connection and
operating procedures.
Laerdal
Care and Maintenance –
1. Clean with mild soap and water; do not submerse trainer or parts in
cleaning fluids or water.Apply a light coat of talcum powder to the face
and chest skin to achieve skin-like feeling.
2. Use only on clean surface.Avoid felt tipped markers, ink pens, acetone,
iodine or other staining products and avoid placing the manikin on
newsprint or inked lines of any kind.
3.To ensure longevity, trainer should be cleaned after each training session
and a general inspection should be conducted regularly.
4. Modules and all other parts should be drained and air-dried thoroughly
before storage and disinfected when needed.
5.Articulating parts will benefit from a light application of talcum powder
prior to training sessions.
6. Store properly between teaching sessions.
4
VitalSim™ Blood Pressure Trainer