Transport And Handing - AYA ARM2003A+ Instructions D'utilisation

TRANSPORT AND HANDING

When transportation, hold the base and lift the refrigerator carefully with an
angle inferior at 45 degree. Never hold the door handle as support. Never
place it upside down nor horizontally. Push refrigerator on its basis and
place it thanks to its roller feet.
INSTALLATION
To fix stably, the appliance must be placed on a flat and solid surface. It should not
be laid on any soft material.
Choose a location where there is no heat source. Keep the refrigerator away from
direct sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where there is no corrosive air.
In order to improve efficiency of the cooling system and save energy, it is
necessary to maintain good ventilation around the appliance for the dissipation of
heat. For this reason, sufficient clear space should be available around the
refrigerator. Suggest: It is advisable for there to be at least 100mm of space from
the back to the wall, at least 100mm from its top, at last 100mm from its side to the
wall and a clear space in front to allow the doors to open 135°. As shown in
following diagrams.
820
-26-