Transport And Handing; Test - AYA AFC295A+ Instructions D'utilisation

TRANSPORT AND HANDING

When transportation, hold the base and lift the refrigerator carefully with an
angle inferior at 45 degree. Never hold the door handle as support. Never
place it upside down nor horizontally. Push refrigerator on its basis and place
it thanks to its roller feet.
INSTALLATION
To fix stably, the appliance must be placed on a flat and solid surface. It should
not be laid on any soft material.
Choose a well-ventilated place. A space of at least 10cm must be left around
the refrigerator.
Choose a location where there is no heat source. Keep the refrigerator away
from direct sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where there is no corrosive air.

TEST

Clean the parts of the refrigerator with lukewarm water on a soft cloth or with a
neutral detergent and with clear water, then wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
Turn the thermostat knob on the "3" position and turn on electricity. The
compressor and the light inside the refrigerator begin to work.
Close the door and wait 30 minutes. If the temperature in the freezer
compartment decreased obviously, it shows that the refrigerator system works
well. When the refrigerator operates for a period of time, the temperature
controller will automatically set the temperature on conditions that the door is
not too often opened.
If the above steps are successful, the trial operations are finished. The
refrigerator works normally.
17