Door Reverse - AYA ARM2003A+ Instructions D'utilisation

DOOR REVERSE

This freezer has been built with the door hinges on the right. If you want to change
the opening direction, please follow the instruction below.
WARNING: When reversing the door, the appliance must not be connected to the
mains. Remove the plug from the mains beforehand.
(2)
(3)
(4)
(1)
(5) (6)
(7)
(8)
1. Open the door. Remove the 7
screws (1) below control knob
and the 6 screws (3) covered by
(2);
2. Push the door up to remove it.
Put the door to one side and lay it
down gently on a padded surface.
3. Swap over the position of the
lower hinge(5)(6) and the feet
(7)(8) to the other side.
4. Remove the hinge pin (9)(10)
that is in the bottom of the door.
At the other side of the door,
insert the replacement hinge pin
t h a t i s s u p p l i e d w i t h t h e
appliance.
5. Follow steps in opposite way to
(9)
(10) assembly the doors
-30-