Transport And Handling; Installation And Operating Conditions - AYA ARIN88/3 Manuel D'utilisation

TRANSPORT AND HANDLING

During transportation, hold the base and lift the refrigera-
tor carefully with an angle inferior than 45 degrees. Never
hold the door handle as a support. Never place it upside
down nor horizontally. Push refrigerator on its basis and
place it with the help of its roller feet.

INSTALLATION AND OPERATING CONDITIONS

This refrigeration appliance is intended for use as a built-in
appliance.
• Installation before using the appliance for the first time
1. Take the product out of the package, remove the scotch
tape protecting the door and the equipment. Any remaining
adhesive stains may be removed with a mild washing agent.
2. Do not throw away the polystyrene elements of the
packaging. If it is necessary to transport the fridge-freezer,
pack it in the polystyrene elements and film as well as pro-
tect ing it with scotch tape
3. Clean the interior surface of the fridge-freezer and the
elements of the equipment with a washing agent dissolved in
lukewarm water, then wipe it dry.
• Ventilation (Figure 1)
1. Level the kitchen cabinet with a level and a square. If nec-
essary, add shims in the base.
2. Keep a minimum distance of 38mm behind the device for
ventilation.
3. The air intake A must be at least 200 cm² and the air must
enter the base of the cabinet through the panel.
4. Check that the position of the socket (1) is correct. The AC
voltage at the point where the appliance will be used must
comply with the data on the nameplate affixed to the inside
left wall of the appliance, near the vegetable box. The outlet
must be properly grounded.
- 7 -