Test; Temperature Control - AYA ARM2003A+ Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TEST

Clean the parts of the refrigerator with lukewarm water on a soft cloth or with
a neutral detergent and with clear water, then wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
Turn the thermostat knob on the "3" position and turn on electricity. The
compressor and the light inside the refrigerator begin to work.
Close the door and wait 30 minutes. If the temperature in the freezer
compartment decreased obviously, it shows that the refrigerator system
works well. When the refrigerator operates for a period of time, the
temperature controller will automatically set the temperature on conditions
that the door is not too often opened.
If the above steps are successful, the trial operations are finished. The
refrigerator works normally.

TEMPERATURE CONTROL

The temperature in the refrigerator compartment and in the freezer
compartment is controlled by the temperature controller installed on the
right side of the refrigerator compartment.
Turn the thermostat knob to regulate the temperature inside the refrigerator.
The marks on the knob are not the exact number of the degrees of
temperature but the temperature grades from "0" to "5". The first grade
corresponds to a forced STOP of the refrigeration and the 5th grade
corresponds to the lowest temperature the refrigerator can produce. Turn
the knob from "1" position to "5" position, the temperature decreases
continuously.
Set the thermostat knob to "2-3"position for a normal use.
-27-

Publicité

Table des Matières
loading

Table des Matières