AYA ARM2003A+ Instructions D'utilisation page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. WARNING: Do not use mechanical
devices or other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
5. WARNING: Do not use electrical
a p p l i a n c e s i n s i d e t h e f o o d s t o r a g e
compartments of the appliance, unless they
are of the type recommended by the
manufacturer.
6. WARNING: Do not damage the
refrigerant circuit.
7. If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
8. It is recommended to check regularly the
supply cord for any sign of possible
deterioration, and the appliance should not be
used if the cable is damaged.
9. To avoid injury or death from electrical
shock, do not operate the appliance with wet
hands, while standing on a wet surface.
10. It is not recommended to use this
refrigerator with an extension cord or power
board. Please ensure that the appliance is
plugged directly into the electrical outlet.
11. When positioning the appliance, ensure
that there is at least a 5cm clearance at the
sides and a 10cm clearance at the back as
this is the main outlet for heat. This will allow
for adequate ventilation.
-21-

Publicité

Table des Matières
loading

Table des Matières