Selve commeo Multi Send BASIS Notice page 135

PREMIUM version
16.9. Devices
16.9.1. Changing the device name
Use the movement buttons
(up) and (down) to
select the "Information" sub-
menu, and press the right
display button to open
it.
Use the movement buttons
es" menu, and press the right display button
to return to the main menu without saving.
The assigned devices are shown. Use the movement buttons
and (down) to select the required device menu, and press the right
display button to open a new menu.
Note: The selected device executes a short movement.
The following functions for the selected device are offered:
• Information: Displays the ID no. and software version of the device.
• You can change the device name (saved in the drive or receiver).
• You can edit the sensor values.
• You can delete devices.
Press the STOP button to
open the editor for changing
the device name. Press
to save and return to the
submenu.
(up) and (down) to select the "Devic-
Use the channel selection
buttons
movement buttons
and
required letter, and press the
STOP button to confirm.
135
to access it. Press
(up)
or and the
(up)
(down) to select the
EN