Selve commeo Multi Send BASIS Notice page 121

PREMIUM version
16. Programming
16.1. "Position display" start screen
No devices assigned
No devices are assigned to the commeo
Multi Send when it is first delivered or fol-
lowing a factory reset.
You can access the main menu.
In this state, the drives and receivers must
first be assigned in the commeo Multi Send.
16.1.1. Automatic mode – manual mode
16.1.2. Start screen "next switching time"
Use the channel selection button
the display.
Press the right display button
select the operating mode using the movement buttons
(up).
Confirm the selection with
start screen.
to switch
At least 1 device assigned
Use the left display button
switch from the start screen to the main
menu.
The display of the left display button
depends on whether the sensor visualisation
is activated or deactivated.
: Sensor visualisation deactivated.
: Sensor visualisation activated.
Press the right display button
between automatic and manual mode.
to activate the selection menu and
. The display switches back to the
If you press the right display button to acti-
vate automatic mode, the next automatically
executed switching time is shown (with
direction of movement).
121
or to
to switch
(down) and
EN