Selve commeo Multi Send BASIS Notice page 101

BASIS version
14.5. Messages
In the main menu, use the movement buttons
menu, and press the right display button
menu without saving.
14.5.1. Reading messages (push message)
Use the movement buttons
push message has a consecutive number.
Message
Overload
Obstacle
Timer
Not possible
Radio/wireless
Sensor
Wind
Alarm
14.5.2. Deleting messages
Note: All messages are always deleted together.
Press the right display button
(up) and (down) to scroll through the push messages. Each
Meaning
The drive has detected an overload.
The drive has detected an obstacle.
A switching action was not executed.
A manual action with the movement buttons
is not executed (e.g. end positions are not set).
The commeo Multi Send cannot reach the displayed commeo device
via radio.
There is a sensor loss.
The drive is in a "wind alarm" state.
The drive is in a general alarm state (not "wind alarm").
.
101
(up) and (down) to select the "Messages"
to access it. Press
Press to confirm. All messages are
deleted.
to return to the main
(up) and (down)
EN