Selve commeo Multi Send BASIS Notice page 102

BASIS version
14.6. Channels
In the main menu, use the movement buttons
menu, and press the right display button
menu without saving.
The channel describes the connection of one or more devices. It is expedient for only one
drive or receiver to be assigned to a channel.
In the "Channels" menu, you can see whether one or more devices are assigned to the chan-
nel and whether the channel is still available.
Note: It is not possible to assign a timer to a channel. In this case, you must also set up a
group with the device/s.
14.6.1. Renaming a channel
The 20 channels can be named individually.
Example: A channel is named after a room, e.g. living room. The devices saved in the
commeo Multi Send can then be allocated to this channel (= activated).
Select the required channel
or channel name using the
movement buttons
and (down). Press the right
display button
switch to the submenu.
Press the STOP button to
switch to the "Change name"
(up) menu.
to
(up) and (down) to select the "Channels"
to access it. Press
Select the required letter or
action with , ,
and confirm by pressing the
STOP button. Press the right
display button
and return to the submenu.
102
to return to the main
and ,
to save