Exit Delay - Agri-Alert 9600 Mode D'emploi

3.6 EXIT DELAY

Definition: The time needed to exit the site before the system starts monitoring the
alarm inputs. This applies only to burglar zone and is common to all zones. It ranges
from 0 to 5 minutes, 59 seconds. The default is 1 minute.
Setting:
1. Press the Entry/Exit Delay key
ENTRY . . . . . . . .
EXIT . . . . . . . . .
2. Type 2 to adjust the exit delay.
EXIT DELAY
1 MIN, 00 SEC
TO MODIFY. . . . .
TO QUIT. . . . . . .
3. Press Enter
RANGE FROM
(0 .. 5 MIN, 0 .. 59 SEC)
ENTER NEW DELAY
_MIN, _ _ SEC
4. Enter the new delay and press Enter. The system displays the new setting and
returns to the Date/Time display.
32
KP-400.rev.06
Entry / Exit Delay
to adjust the exit delay or Cancel
ENTER
.
6
(1)
(2)
↵ ↵ ↵ ↵ ↵
( )
(#)
to quit.
#
Cancel