Bypass / Activate Function; Changing Zone Status - Agri-Alert 9600 Mode D'emploi

3.4 BYPASS / ACTIVATE FUNCTION

Definition: The Agri-Alert system can activate or bypass individual zones and parti-
tions. When a zone is bypassed, no alarm detection is performed on the zone input.
When an alarm occurs, the relevant data are recorded in alarm memory and the
dialout sequence is launched.
Note that burglar zones cannot be activated in this way although they can be by-
passed one zone at a time. These zones are activated with the Arm/Disarm key
0
and a password or
Arm/Disarm

3.4.1 Changing Zone Status

1. Press the Bypass / Activate
ZONE . . . . . . . . .
PARTITION . . . . .
2. Type 1 to change the status of a zone;
ENTER ZONE
(1 .. 96): _ _
3. Type the number of the zone and press Enter. If you don't know the zone number,
type any number to step to the scrolling menu.
ZONE #1
BARN #2
4. The label of the selected zone is displayed. If the zone displayed is not the correct
one, use the arrow keys
Enter
ENTER
message: INCOMPLETE DATA.
*
Enter
Bypass/Activate
Previous / Next
. If the zone is not properly configured, the system displays the
0
.
Arm/Disarm
4
key.
(1)
(2)
to scroll the menu to the desired zone and press
29
KP-400.rev.06