To Change The Status Of A Partition; Viewing Bypassed Zones - Agri-Alert 9600 Mode D'emploi

ACTIVATE . . . . . . (1)
BYPASS . . . . . . . . (2)
5. Type 1 to activate, or 2 to bypass the zone. The new state of the zone is dis-
played and the system returns to the Date/Time display.

3.4.2 To change the status of a partition:

1. Press the Bypass / Activate
ZONE . . . . . . . . .
PARTITION . . . . .
2. Type 2 to change the status of a partition.
ENTER PARTITION
(1 .. 16): _ _
3. Type the number of the partition and press Enter. If the partition does not exist,
the system responds with the message: PARTITION NONE.
ACTIVATE . . . . . . (1)
BYPASS . . . . . . .
4. Type 1 to activate or 2 to bypass the partition. The new status is displayed and
the system returns to the Date/Time display.

3.4.3 Viewing Bypassed Zones

1. Press the Zone key
ZONE
BYPASSED
BYPASSED
ZONE # 4,8
2. Press down-arrow key and press Enter to select
BYPASS option. The bypassed zones are displayed.
30
KP-400.rev.06
4
Bypass/Activate
(1)
(2)
(2)
.
Zone
key.
ENTER
to select the DISPLAY