Maintenance; Maintenance Plan; Saw Blade Change - Zipper ZI-KGS210DS Mode D'emploi

Incorrect cleaning products can attack the finish of the machine. Do not use any solvents,
nitro thinners or other cleaning products that could damage the machine's finish.
Observe the specifications and instructions of the cleaning agent manufacturer.
Keep all safety devices, ventilation slots and the motor housing free of dust.
•
• Therefore, clean the machine after each use and remove any sawdust with a brush, broom or
vacuum cleaner.
16.2

Maintenance

The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the
•
machine.
Use only proper and suitable tools.
•
Use only original spare parts recommended by the manufacturer.
•
16.2.1

Maintenance plan

The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when the machine is used within the technical limits:
Interval
Before usage
After usage
After 50h (/ 10h)
When required
16.2.2

Saw blade change

Risk of injury! Wear protective gloves when changing the saw blade.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
Components Action
Saw blade Check for damage and replace if necessary.
Check function (see function check saw blade
Saw blade guard
protection)
Table inlet Check for damage and replace if necessary.
Cable Check for damage and repair if necessary.
Maschine
Saw blade guard Remove dust/wood splinters and dirt
Chip bag
Carbon brush Check and replace if necessary.
Check sharpness of saw blade and replace when
Saw balde
necessary
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
N O TE
C AU TI O N
42
ZI-KGS210DS