Electrical Connection - Zipper ZI-KGS210DS Mode D'emploi

14.3

Electrical connection

Dangerous electrical voltage!
 The machine may only be connected to the mains supply and the associated
checks carried out by a qualified electrician or under the instruction and supervision
of a qualified electrician!
Check, whether the neutral connection and the protective grounding function properly.
•
Check, whether the supply voltage and the frequency correspond to the specifications of the
•
machine.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
1. Assembly mitre lock
• Screw the mitre lock (1) into the bore hole on the rotary
table (2).
2. Assembly workpiece support
• Attach the two workpiece supports (1) to the left and
right of the fixed table of the machine.
• Use in each case two hexagon socket screws (2) and the
Allen key 6 mm (3).
3. Fasten the sawdust bag
• Press the metal ring (2) of the sawdust bag (1) together
and slide it over the chip collection outlet.
• After releasing the metal ring (2), the sawdust bag is
fixed to the machine.
4. Assembly downholder
• The downholder (1) can be placed to the left or right of
the saw blade.
• To do this, place the downholder (1) in the hole (2) on the
machine.
WAR N I N G
ASSEMBLY
35
ZI-KGS210DS