Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12
SAFETY
This section contains information and important notes on the safe commissioning and handling of the
machine.
For your safety, read this manual carefully before commissioning. This will enable you to
handle the machine safely and thus prevent misunderstandings as well as personal injury and
damage to property. Pay special attention to the symbols and pictograms used on the
machine as well as the safety information and danger warnings!
12.1
Intended use of the machine
The machine is intended exclusively for the following activities:
Cross-cut and mitre cutting of wood and materials with similar physical properties to wood within the
specified technical limits.
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use
beyond this and for any resulting damage to property or injury.
12.1.1
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity:
Temperature (for operation):
Temperature (Storage, Transport):
12.1.2
Prohibited applications / Dangerous misuse
Operating the machine without adequate physical and mental fitness.
•
Operating the machine without knowledge of the manual.
•
•
Modifying the machine design.
•
Operating the machine in a potentially explosive environment (machine can generate ignition
sparks during operation).
•
Operation of the machine in closed rooms without chip and dust extraction.
•
Operating the machine outside the technical limits specified in this manual.
•
Removing of the safety markings attached to the machine.
Modifying, circumventing or disabling the safety devices of the machine.
•
Cutting of materials with dimensions outside the limits specified in this manual.
•
Use of tools which do not meet the safety requirements of the standard for machine tools for
•
woodworking (EN847-1).
Use of saw blades made of HSS steel.
•
Use of saw blades with a lower permitted speed than the machine.
•
The non-intended use or the disregard of the explanations and instructions described in this manual will
result in the expiration of all warranty claims and compensation claims for damages against ZIPPER
MASCHINEN GmbH.
12.2
User Requirements
The machine is designed to be operated by one person. The prerequisites for operating the machine are
physical and mental fitness as well as knowledge and understanding of the operating instructions. Persons
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
N O TE
max. 65 %
+5° C to +40° C
-20° C to +55° C
SAFETY
29
ZI-KGS210DS
Publicité
Table des Matières
