Note:
The white powder on the pump 3 is not soiling.
It is a talcum powder that was used in the factory
for the first pump lubrication.
After frequent usage it could happen that the pump 3
may require lubrication:
1. Unscrew the sealing cap 2.
2. Insert a few drops of silicon oil into the handgrip.
Other oils could damage the seals or the plastic.
Fig. 7
3. Screw the sealing cap 2 back on hand-tight.
Disposal
Dispose of the appliance in an environmentally-
friendly manner.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 89562
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
- 23 -