Mounting The Tube Attachment; Cleaning And Care; Disposal - Powerfix Profi Z29760A Instructions D'utilisation Et Consignes De Sécurité

Mounting the tube attachment

The tube attachment is intended for clamping tubes with a diameter
of 38 - 43 mm.
1. Release the hexagonal socket head screw
the spindle using the supplied hexagon socket screw key
2. Turn the vice jaws tommy bar
spindle
10
3. Using the supplied hexagon socket screw key
hexagonal socket head screw
base and remove the spindle
11
4. Now that the hexagonal socket head screw
remove it and take the vice base off the ball joint
5. Place the tube attachment
fasten it in place with the hexagonal socket head screw
6. Turn and tilt the ball joint

Cleaning and care

Clean the product with a dry, fluff-free cloth.
Never use aggressive or corrosive cleaning agents, as they
may damage the product.

Disposal

The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority fo r more details of
how to dispose of your worn-out product.
is turned out of the rear jaw
13
5
3
anticlockwise until the
9
.
2
on the underside of the vice
8
from the vice.
10
on to the ball joint
to achieve the right position.
at the end of
.
12
, release the
12
is accessible,
4
.
5
and
5
.
4
GB/IE 9