Screen Display; Getting Started; Initial Setup - Fora Diamond MINI DM30 Manuel De L'utilisateur

Screen Display

1. Measurement Unit
2. Blood Drop Symbol
3. Measuring Mode
4. Memory Symbol
5. Test Result

Getting Started

Initial Setup

Please follow the initial setup procedure before using the device
for the first time or after you have charged the battery. When the
battery power is extremely low and "
screen, the meter cannot be turned on.
Step 1: Enter the Setting Mode
Press SET. The display turns on.
Step 2: Configuring the Settings (Date, Time Format, Time,
Universal Tone, Memory Deletion and Reminder Alarm)
Press MAIN repeatedly to adjust the value or enable/disable
the setting. Then press SET to confirm the setting and switch to
another field.
6. Face Low/High Symbol
7. Warning Symbol
8. Low Battery Symbol
9. Date/Time
10. Reminder Alarm
& " (u) appears on the
EN-3
Step 3: Enter the Bluetooth pairing (for DM30b)
This step is recommended when the user needs to pair this meter
to a Bluetooth receiver for the first time, or when the user needs
to pair this meter to another new Bluetooth receiver.
" symbol flashing on the display, press SET to skip
With the "
the pairing.
If you wish to enter the pairing mode, press MAIN once and the
meter will display " " . Then press SET to confirm and the