Battery Recharge; Caring For Your Device - Fora Diamond MINI DM30 Manuel De L'utilisateur

• The USB port on the DM30b meter can only be used for battery
recharge. It does not have the function of data transmission.
Maintenance

Battery Recharge

Your meter comes with a built-in rechargeable Li-polymer battery.
To optimize battery life, it is advisable to recharge the battery
when the low battery symbol "
Important!
• It is absolutely necessary that the battery is fully recharged
every 4 months when not in use to ensure the longevity of
the battery. The battery may not be rechargeable if it is not
recharged within a period of 4 months.
• To avoid a possible shock, Do NOT insert a test strip while the
battery is charging.
• You must charge the battery immediately and reset the date
and time when the battery power is extremely low and "
" (u) appears on the screen. The meter cannot be turned on.
The meter battery may be charged using one of the following
options:
• USB cable (computer charging station)
• USB cable with an AC adapter (wall charging station) Both the
USB cable and AC adapter are included in your kit.
" appears on the screen.
1. Connect the USB cable
to the USB port of the
meter.
2. Connect the other end
of the cable to a free USB
port on your personal
computer or an AC
adaptor.
3. " "will appear on the
display and the charging
indicator will light up in
red when the battery is
recharging.
4. It should take approximately 2 hours to fully charge. Recharging
the battery does not affect the test results stored in the
memory.
5. After the battery is fully charged, the red light will turn green.
Remove the USB cable and the meter will automatically be
&
switched off.

Caring for Your Device

• To clean the exterior of the device, wipe it with a cloth
moistened with tap water or a mild cleaning agent, then dry the
device with a soft dry cloth. Do NOT rinse with water.
• Do NOT use organic solvents to clean the device.
EN-10