Changing The Password - Sony Glasstron PLM-A55E Mode D'emploi

3
Verify a password using the jog dial.
If the password is correct, select YES by
turning the jog dial. If not, select NO.
Then press the jog dial.
If you select NO, return to step 1.
If you select YES, go to step 4 in "Using
the Glasstron" (page 25).

Changing the password

When the power is on, press RESET with a
pointed object such as a ballpoint pen.
• If you have already read the WARNING
messages (pages 17 through 21) (for
example, while watching a video picture),
the display will return to step 1 in
"Setting the password" (page 22).
• If you have not yet finished reading the
WARNING messages (for example, you
have forgotten your password), the
display will return to step 3 in "Turning
on the Glasstron" (page 17).
If you need to set a password after having
set the Glasstron to operate without a
password, follow the same procedure
above.
Note
Pressing the RESET button does not affect
picture or sound adjustments.
PUSH DISPLAY
SEL / PUSH EXEC
RESET
IS YOUR PASSWORD
CORRECT?
123
YES
NO
SEL EXEC
23
-GB