Checking The Screen Position Alignment - Sony Glasstron PLM-A55E Mode D'emploi

7
Read the next WARNING, then go to "Checking the screen position
alignment."

Checking the screen position alignment

WARNING
Each time this product is used, adjustment screens will appear, requiring the viewer to
properly fit the product. Proper fit means that an asterisk ( * ) will appear in each corner of the
display. To prevent eye damage, do not use this product if the vertical lines do not cross the
horizontal line on the next screen.
The Glasstron includes two small (left and right) LCDs. You are watching a combined picture
created from these two screens. Although the screen position is properly aligned at the factory,
it may become misaligned if the Glasstron is deformed or damaged. Check the screen position
alignment every time you turn on the Glasstron. If you cannot have correct screen alignment,
stop using the Glasstron immediately.
1
Press the SEL/PUSH EXEC jog dial.
PUSH DISPLAY
SEL / PUSH EXEC
WARNING
TO PREVENT EYE DAMAGE,
DO NOT USE THIS PRODUCT
IF THE VERTICAL LINES
DO NOT CROSS THE
HORIZONTAL LINE ON THE
NEXT SCREEN.
SEE THE USER'S MANUAL
FOR DETAILS.
CHECK
Screen
continued
19
-GB