Sony Glasstron PLM-A55E Mode D'emploi page 34

Precautions (continued)
Others
• Unplug the product from the mains and
refer servicing to qualified service
personnel under the following conditions:
- When the mains lead or plug is
damaged or frayed.
- If liquid has been spilled into the
product.
- If the product has been exposed to rain
or water.
- If the product has been subject to
excessive shock by being dropped, or
the cabinet has been damaged.
- If the product does not operate
normally when following the operating
instructions. Adjust only those
controls that are specified in the
operating instructions. Improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified
technician to restore the product to
normal operation.
- When the product exhibits a distinct
change in performance –– this indicates
a need for service.
• Do not disassemble or remodel the
product. It may cause fire or electric
shock. Have the product checked and
repaired at your Sony dealer or local
authorised Sony service facility.
• Do not attempt to service the product
yourself since opening the cabinet may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified
service personnel.
• When replacement parts are required, be
sure the service technician certifies in
writing that he has used replacement
parts specified by the manufacturer that
have the same characteristics as the
original parts.
Unauthorised substitutions may result in
fire, electric shock, or other hazards.
34
-GB
• Upon completion of any service or
repairs to the product, ask the service
technician to perform routine safety
checks (as specified by the manufacturer)
to determine that the product is in safe
operating condition, and to so certify.
• Unplug the product from the mains
before cleaning. Clean the product with a
dry, soft cloth, or a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of solvent, such as
alcohol or benzine.
Note on carrying
Use the supplied carrying cases whenever
you carry the Glasstron. Put the display unit
into the smaller case and the power supply
box into the inside pocket of the larger one.
Display unit
Power supply box