Connection; Checking The Supplied Accessories; Checking The Position And Orientation Of Connectors; Connecting The Hdmi Cable - Sony ELF-SR1 Mode D'emploi

Connection

Checking the Supplied Accessories

Check the following accessories before
connection.
Also, refer to the operation manual of the
connecting devices.
Display (1)

Side panel (2) (Both can be used for either the

left or the right side)
Top flange (1)

Bottom stand (1)

USB Type-C cable (1)

HDMI cable (1)

AC adaptor (1)

 AC power cord (1)
Operating Instructions (this manual) (1)

Cleaning cloth (1)

Checking the Position and Orientation of
Connectors
Check the position, shape, and orientation of
connectors on the rear of the unit.
Display
Display
Note
Cables can be pulled out from the hole at the
lower part of the rear of the unit or the bottom of
the unit.

Connecting the HDMI Cable

Connect the HDMI input connector of the unit
and the HDMI output connector of your
computer with the supplied HDMI cable.
Display
Notes
 Be sure to use the supplied HDMI cable for
connection.
Directly connect to the computer without using

an HDMI switcher or other devices.
Check the position and orientation of the

connector and cable before connecting the
cable to the connector.
Before connecting, make sure the HDMI

connector supported by your computer
supports HDMI 2.0 or higher to ensure the
original image can be displayed on the unit.
For details, see the operating instructions for
your computer.

Connecting the USB Type-C Cable

Connect the (Communication control)
connector of the unit and the USB connector of
your computer with the supplied USB Type-C
cable.
Display
HDMI cable (supplied)
Computer
USB Type-C cable (supplied)
Computer
13
GB