Error Messages - CAME GGT40AGS Manuel D'installation

ERROR MESSAGES

E2 Adjustment error
E3 Encoder failure error
E4 Service test failure error
E7 Operating time error
E8 Open release-hatch error
E9 Obstacle detected during closing
E10 Obstacle detected during opening
E11 The maximum number of obstacles detected consecutively has been exceeded
E12 No line voltage
E14 Serial communication error
E15 Incompatible transmitter error
E16 Open SLAVE-motor hatch error
E24 BUS device communication error
E25 Conflicting addresses for configured BUS devices
NOTICES
C0 Wire contact 1-2 (NC) is open.
i3 The wire contact 2-3 (NO) is closed.
i3P The wire contact 2-3P (NO) is closed.
i4 The wire contact 2-4 (NO) is closed.
i7 The wire contact 2-7 (NO) is closed.