CAME ZLX24SA Mode D'emploi page 107

Enable password
Set a 4-digit password. The password will be requested to anyone who wants to access the main menu.
This option only shows if a password has NOT been enabled.
Password
Remove password
Remove the password that protects access to the main menu.
This option only shows if a password has been enabled.
Password
Change password
Change the password protecting access to the main menu.
This option only shows if a password has been enabled.
Password
Forgotten password
If you lose the password, you will need to reset the board to its factory settings. See [Factory reset].
Factory reset
To restore the electronic board data to factory settings:
Disconnect the control board from the power supply.
Press and hold the < and > buttons, then reconnect the control board to the power supply.
Continue to press and hold the < > buttons until [Factory reset] is displayed.
Select [Confi rm YES].
Press ENTER to confi rm.
When you reset the control board, all saved users, set times, manoeuvre confi gurations and calibration
operations are deleted.
When using a CAME KEY device, always update the board fi rmware to the latest version.
Enable password
Remove password
Change password
Use the arrows and the Enter button to dial the desired
code.
Enter the password again using the arrows and the Enter
button to confi rm.
Confi rm? NO
Confi rm? YES
Use the arrows and the Enter button to dial the desired
code.
Enter the password again using the arrows and the Enter
button to confi rm.