CAME ZLX24SA Mode D'emploi page 98

Passage-open warning light
Signal gate status.
The device is connected to output/terminal 5.
Confi guration>
Manage lights
Additional light
Choose the operating mode for the lighting device connected to output E3.
Confi guration>
Manage lights
Courtesy time
Defi ne how many seconds the additional light (set up as courtesy light) stays on after an opening or closing manoeuvre.
Confi guration>
Manage lights
Pre-fl ashing time
Adjust the time for which the beacon is activated before each manoeuvre.
Confi guration>
Manage lights
<Mode> BUS fl ashing beacon
Choose the operating mode for the lights connected to the BUS connector.
The function only appears if there is a BUS fl ashing beacon connected.
Confi guration>
Manage lights>
BUS fl ashing beacon
Passage-open warning
light
Additional light
Courtesy time
Pre-fl ashing time
Mode
Warning light on (Default) - The warning light stays on
when the gate is moving or open.
Warning light fl ashing - The warning light fl ashes every
half second when the gate is opening and stays on when
the gate is open. The light fl ashes every second when the
gate is closing, and remains off when the gate is closed.
Disabled (Default)
Cycle lamp - The lamp stays on during the manoeuvre.
The light remains off if an automatic closing time
is not set.
Courtesy light - The light switches on when a manoeuvre
starts and remains on once the manoeuvre has fi nished,
for the time set under the function [Courtesy time].
60 to 180 seconds (Default 60 seconds)
Deactivated (Default)
1 to 10 seconds
Flashing beacon (Default). The light fl ashes during opening
and closing.
Cycle fl ashing beacon. The light fl ashes during opening
and closing and remains on in the countdown before
automatic closure.
The colour of the fl ash depends on the functions
[Opening colour], [Closing colour] and [Pre-fl ashing
colour].