Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Connection
Before connection
•
Read the owner's manual of the device you are connecting to the projector.
•
Some computers cannot be used with or connected to this projector.
Check for an RGB and an HDMI output terminal, supported signal, etc.
•
Turn off the power of both devices before connecting.
•
The figure below shows sample connections. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Video recorder,
DVD player, etc.
To audio
To
output
video
White (L)/
output
Red (R)
Video cable
(not supplied)
Audio cable
(not supplied)
HDMI™ cable
(not supplied)
To audio input White
To HDMI™
terminal
DVD video recorder, etc.
* The connection for COMPUTER 1 IN terminal described here is also applicable for COMPUTER 2 IN terminal.
To
S-video cable
S-video
(not supplied)
output
To RGB output
RGB cable
(supplied)
Audio cable
(not supplied)
Control
cable (not
Audio cable
supplied)
(not supplied)
(L)/Red (R)
Audio amplifier, etc.
Computer
Conversion adapter
BNC-pin (not supplied)
To Y/C
Green(Y)/Blue(C
To audio
output
Monitor cable Mini
D-sub 15P-BNC
Audio cable (not supplied)
To RS-232C
terminal
Computer (for control)
20
DVD video recorder, etc.
/C
output
B
R
)/
B
Red (C
)
R
(not supplied)
Monitor
It is necessary to switch
to MONITOR OUT by the
switch.
To audio
output
White (L)/
Red (R)
Publicité
Table des Matières
