Recalling Preset Stations; Aux In Mode; Setting The Clock - PERFECTPRO MyTUBE Manuel De L'utilisateur

Recalling preset stations

1. Press the On/Off button to turn on the radio.
2. Press the SOURCE button to switch to "FM RADIO" mode.
3. Press the MENU button until "MEM BROWSE" is displayed.
4. Press the Tuning Down or Tuning Up button. The display will show the station frequency and the preset number.
5. The "MEM BROWSE" function stays active for about 8 second. If no action is taken the radio will return to showing the RDS
information of the selected station.

AUX IN MODE

A 3.5mm stereo AUX-IN socket is provided on the side behind the rubber cover, for connecting an external audio device such as
MP3 player or CD player (not included with this radio).
1. Connect an audio source to the AUX-IN socket.
2. Press the SOURCE button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume of both the radio and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the sockets and radio.
Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from entering the radio. Keep the rubber cover
closed under these conditions.
The Auto-Power management function will be activated in AUX mode. If there is no signal from the AUX input jack for a period over
15 minutes, the unit will automatically switch to standby mode. The operation indicator and the LCD will go off in such case. Pressing
the On/Standby button will wake up the unit.
9

SETTING THE CLOCK

The clock can only be set when the radio is in standby mode. If no buttons are pressed for 5 seconds, the radio will exit the clock
setup and the setting is cancelled.
1. Press the MENU button and the display will show "CLOCK SET".
2. Press the SELECT/INFO button to enter and the hour digits flash on the display.
3. Press the Tuning Down or Tuning Up button to set the hour.
4. Press the SELECT/INFO button to confirm. The minute digits flash.
5. Press the Tuning Down or Tuning Up button to set the minute.
6. Press the SELECT/INFO button to confirm. The day flashes.
7. Press the Tuning Down or Tuning Up button to set the current day.
8. Press the SELECT/INFO button to confirm. The month flashes.
9. Press the Tuning Down or Tuning Up button to set the current month.
10. Press the SELECT/INFO button to confirm. The year flashes.
11. Press the Tuning Down or Tuning Up button to set the current year.
12. Press the SELECT/INFO button to confirm.
13. The display will then show "synclock on". Press the Tuning Down or Tuning Up button to choose either "synclock on" or "synclock off".
14. Press the SELECT/INFO button to confirm.
15. The display will then show "English". Press the Tuning Down or Tuning Up button to choose among "English", "Nederlands",
"Deutsch" and "Français".
16. Press the SELECT/INFO button to confirm and finish setting.
RDS time synchronization
If "SYNCLOCK ON" is selected. Some RDS stations transmit a time signal. If reception is good and you have selected the
"SYNCLOCK ON" option during the time setting, the time will be automatically updated. Time synchronisation can take several
minutes. The automatic time setting is always activated when the radio is switched from standby to FM broadcasting and
receives a RDS station.
GB
G B
10