Safety Instructions; Declaration Of Conformity - PR electronics 6335 Mode D'emploi

Masquer les pouces Voir aussi pour 6335:
Table des Matières

Publicité

Safety instructions

Ex installation:
For a safe installation of 6335B in hazardous area the following must be
observed. The module must only be installed by qualified personnel who are
familiar with the national and international laws, directives and standards that
apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
Repair:
Repair of the module must be done by PR electronics A/S only.
18

DECLARATION OF CONFORMITY

As manufacturer
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
hereby declares that the following product:
Type: 6335
Name: 2-wire HART
is in conformity with the following directives and standards:
EMC directive 2004/108/EC and later amendments
EN 61326
This declaration is issued in compliance with article 10, subclause 1 of the EMC
directive. For specification of the acceptable EMC performance level, refer to
the electrical specifications for the module.
The ATEX directive 94/9/EC and later amendments
EN 50014 and EN 50020
ATEX certificate: 99ATEX126961
Notified body for CENELEC/ATEX: UL International Demko A/S 0539
Rønde, 22 Dec. 2005
®
transmitter
Peter Rasmussen
Manufacturer's signature
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pretrans 6335Pretrans 6335dPretrans 6335a

Table des Matières