How The Cleaner Works - Kokido DRAKBOT Manuel D'utilisation

HOW THE CLEANER WORKS

The cleaner has two adjustable propelling nozzles on both ends. Water is first sucked in
from the bottom (suction nozzle on both ends) of the cleaner, goes through the mesh
filter plate and is then discharged from the propelling nozzle. Water jetting from the
nozzle propels the cleaner forward. Propelling nozzles are opened alternately so that
the cleaner moves back and forth on the pool floor. While moving, cleaner bottom will
suck and store the debris inside (underneath the mesh).
Setting the propelling nozzles to different degree markings (0°..20°..40°) will lead
cleaner moves in following different patterns. Cleaners moves approximately in a
straight line when the nozzle is positioned at 0°. Setting the propelling nozzle position
to other degrees will make the cleaner turn to left / right side against the propelling
nozzle turning direction and then move along a radian path. The larger degree the
propelling nozzle is positioned to, the larger radian path the cleaner will follow.
NOTE: Cleaner DOES NOT automatically reverse upon contact with the pool wall. The
cleaner's forward & backward movement duration varies according to the settings
under "CYCLE" mode.
8