How The Robot Works - Kokido Manga X Manuel D'utilisation

HOW THE ROBOT WORKS

The robot has a water-propelling nozzle at the bottom of the swivel head. Water is first
sucked in through the suction mouth at the bottom of the robot, which then goes through
the filter and is discharged via the propelling nozzle. Water jetting from the nozzle propels
the robot forward. Once the robot stops against an obstacle such as the pool wall, its side
flap sways and its swivel head turns 180
direction. The robot moves in a generally straight pattern in one direction and in an arc
pattern in the other direction. The robot vacuums the pool bottom as it moves, collecting
debris in its compartment.
1. Swivel head
Sliding switch
1.1.
Power indicating
1.2.
light
1.3. Water sensors
1.4. Charging port
Side flap (with
2.
side pin)
Swivel
3.
smoothing-ring
4. Top cover
4.1 Swivel fin
Swivel head
5. bottom screw
plate
6. Filter cover
7. Base
Yellow triangle
7.1.
pattern
Grip (under
7.2. Yellow triangle
pattern)
8. Locking pin
9. Wheel axle
Rear wheel (with
10.
washer)
Front wheel
11.
(with washer)
Draining filter
12
plate
Drainage outlet
13
flap
Suction mouth
14.
flap
15 Float
Hook (with
16 V-clip) for
Telescopic pole
17 Charging cable
18 Adaptor
o
, allowing the robot to move in the opposite
Replacement Parts
Number
RC30ASM07/LGRY
RC30ASM07LGRY//US
(USA)
---------
---------
---------
---------
RC30-07/LGRY
RC30-08-004
RC25ASM03
---------
RC30-05-005/LGRY
RC25-09
RC25ASM04
RC25ASM04/US (USA)
---------
---------
RC30-10-014
RC25ASM08
RC25-12
RC30ASM09/LGRY
RC25ASM06
RC30-16/LGRY
RC30-17-001
RC30-17-002 (EU)
RC30-17-002/US (USA)
RC30-17-002/AU
(Australia/New Zealand)
10