How The Robot Works - Kokido Vektro Auto RC30 Manuel D'utilisation

HOW THE ROBOT WORKS

The robot has a water propelling nozzle at the bottom of the top swivel head. Water is first
sucked in from the suction mouth on at the bottom of the robot, goes through the filter
and then discharged from the propelling nozzle. Water jetting from the nozzle propels the
robot forward. Once the robot stops against an obstacle like pool wall, its side flap rotates
and its swivel head turns 180
robot moves in a generally straight pattern in one direction and in an arc pattern in the
other direction. While moving, the robot vacuums pool bottom capturing the debris inside
the debris compartment.
o . The robot will start moving in the opposite direction. The
1 Swivel head
2 Sliding switch
3 Power indicating
light
4 Water sensors
5 Charging port
6 Side flap
7 Swivel
smoothing-ring
8 Top cover
9 Filter cover
10 Draining filter
plate
11 Suction mouth
flapper
12 Bumper x 2
13 Locking pin x 2 (1
pin is fixed)
14 Grip (under
Orange triangle
pattern)
15 Floor Squeegee
16 Float cover
17 Float
18 Hook (for
Telescopic pole)
19 Charging cable
7