Selection Of Mesh Filter Plate; Propelling Nozzle Setting - Kokido DRAKBOT Manuel D'utilisation

- To release the brush bar, push the hook to release the it from the hole.

Selection of mesh filter plate

There are 2 different types of mesh included: fine mesh and coarse mesh. If most
debris on pool floor are larger in size such as leaves, use the coarse mesh filter plate.
Once the large debris is cleaned, stop the cleaner and change to the fine mesh.

Propelling nozzle setting

Remark: Degree marking provided below are for setting purposes, its number does not
reflect its turning angle. You may regard them as direction and radian path cleaner
moves along.
Below setting instructions are recommended as an initial start for different pools and
situations; you can select a proper nozzle setting depending on your pool situation and
the working principles mentioned above.
Setting 1 (recommended for rectangular / square/oval pool)
Nozzle setting
Moving path
0° / 30°
10