Cleaning And Maintenance; Storing The Appliance - Russell Hobbs 14845 Instructions

Caution keep clear of the escaping water and steam
Water and steam will wash scale and dust through the soleplate, and into the
•
sink.
When the reservoir is empty, release the self clean button.
•
Unplug the iron, and place it on its heel to cool.
•
When it's cold, wipe off any moisture.
•
Store the iron on its heel, to avoid corrosion and damage to the soleplate.
•
ANTI-SCALE:
The anti-scale agent incorporated in the iron helps prevent the build-up of scale.
•
Don't use a descaling solution, or you'll destroy the anti-scale agent.
•

CLEANING AND MAINTENANCE

Unplug the iron when not in use, before moving and before cleaning. Let it cool
•
down fully before cleaning and storing away.
Remove spots from the soleplate with a little vinegar.
•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
•
service department or return to the supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use
•
and before cleaning. Ensure that the speed control is set to "0".
It is much easier to clean the accessories directly after they have been used.
•
Wash them in warm, soapy water, rinse and dry well.
The body of the appliance and the stand should be cleaned with a damp cloth.
•
Do not let water enter the appliance or the stand.
Do not use bleach or other abrasive substance or solvents to clean your
•
appliance as it can be damaging to the finish.
Do not immerse the appliance in water or any other liquid, or hold it under a
•
running tap to clean.

STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above.
•
Ensure that all parts are dry before storing.
9