Additional Safeguards; Parts Diagram - Russell Hobbs 14845 Instructions

ADDITIONAL SAFEGUARDS

Take care not to scratch the soleplate – avoid buttons, zips, etc.
•
The iron has a protective thermal fuse, which will blow if it overheats. If this
•
happens, the iron will stop working, and must be returned for repair.
Don't use the iron if it's dropped or damaged, or if it malfunctions or leaks.
•
If the cable is damaged, return the iron, to avoid hazard.
•

PARTS DIAGRAM

OPERATING INSTRUCTIONS
BEFORE USING FOR THE FIRST TIME:
Don't worry if the iron smokes a bit at first, it'll stop as the element cures.
•
Iron an old piece of cotton fabric, to clean the soleplate.
•
PREPARATION:
Check for textile care symbols
•
Iron fabrics needing low temperatures
•
temperatures , and finish with those needing high temperatures
4
.
first, then those that need medium
.