SYNQ DMC.2000 Mode D'emploi page 9

ENGLISH
34. ECHO EFFECT button: press this button to activate the echo effect. Depending on the sync-mode
(manual or beat synchronized), different settings are possible:
 Manual mode: the FX-SYNC button (38) is dark. You can set all parameters manually, use the
following controls:
 Jog-wheel (22): used to set the echo time from 1ms to 2000ms.
 Y/RATIO button (40): as long as the Y/RATIO-button is blinking you can use the jog-wheel
(22) to change the impact (dry/wet) of the effect.
 Beat synchronized mode: the FX-SYNC button (38) is lit. You can use the following controls:
 EFFECT SYNC-buttons (39+40): choose one of the beat synchronized echo presets.
 Y/RATIO button (40): as long as the Y/RATIO-button is blinking you can use the jog-wheel
(22) to change the impact (dry/wet) of the effect.
35. FLANGER EFFECT button: press this button to activate the flanger effect. Depending on the sync-
mode (manual or beat synchronized), different settings are possible:
 Manual mode: the FX-SYNC button (38) is dark. You can set all parameters manually, use the
following controls:
 Jog-wheel (22): used to manually change the effect.
 Y/RATIO button (40): as long as the Y/RATIO-button is blinking you can use the jog-wheel
(22) to change the impact (dry/wet) of the effect.
 Beat synchronized mode: the FX-SYNC button (38) is lit. You can use the following controls:
 EFFECT SYNC-buttons (39+40): choose one of the beat synchronized sweep presets.
 Y/RATIO button (40): as long as the Y/RATIO-button is blinking you can use the jog-wheel
(22) to change the impact (dry/wet) of the effect.
36. FILTER EFFECT button: press this button to activate the filter effect. Depending on the sync-mode
(manual or beat synchronized), different settings are possible:
 Manual mode: the FX-SYNC button (38) is dark. You can set all parameters manually, use the
following controls:
 Jog-wheel (22): used to manually change the cutoff frequency of the filter.
 Y/RATIO button (40): as long as the Y/RATIO-button is lit you can use the jog-wheel (22) to
change the impact (Q-factor) of the filter.
 Beat synchronized mode: the FX-SYNC button (38) is lit. You can use the following controls:
 EFFECT SYNC-buttons (39+40): choose one of the beat synchronized sweep presets.
 Y/RATIO button (40): as long as the Y/RATIO-button is lit you can use the jog-wheel (22) to
change the impact (Q-factor) of the filter.
37. BRAKE button: press this button to activate the brake effect. Now you can determine the
acceleration/deceleration speed of the music while using the PLAY/PAUSE button (20). You can set the
parameters with buttons (39+40), see below.
38. FX SYNC button: press this button to toggle between manual and beat synchronized effect mode!
Please refer to points (34+35+36) for more information.
39. EFFECT SYNC/START-button: this button has several functions, depending on the effect mode:
 BPM-Synced effects: when an effect is used in beat synchronized mode, this button is lit. You can
now choose how you want the effect to be synchronized to the beat. Use this button to cut the
current BPM-parameter in half.
 BRAKE effect: press this button to change the acceleration time (time from zero to full speed).
While the button is lit, you can use the jog-wheel (22) to change the time from 0,0s (instant start) to
almost 10s. (very slow start)
40. EFFECT SYNC/STOP/Y/RATIO-button: this button has several functions, depending on the effect
mode:
 BPM-Synced effects: when an effect is used in beat synchronized mode, this button is lit. You can
now choose how you want the effect to be synchronized to the beat. Use this button to double the
current BPM-parameter.
 BRAKE effect: press this button to change the deceleration time (time from full speed to zero).
While the button is lit, you can use the jog-wheel (22) to change the time from 0,0s (instant stop) to
almost 10s. (very slow stop)
 IMPACT parameter: while one of the 3 DSP-effects is activated, press the button until it starts
blinking. Now you can adapt the impact of the selected effect, also see EFFECT buttons (34+35+36).
41. TIME Button: The TIME button switches between elapsed playing time, remaining time of the selected
track.
SYNQ
®
7/107
OPERATION MANUAL
DMC2000