Important - SYNQ DMC.2000 Mode D'emploi

ENGLISH
Software support and updates:
VirtualDJ frequently adds new features and improvements to their software so we recommend you to
visit their website (www.virtualdj.com) and register your software: on the VirtualDJ website choose
the DOWNLOAD-menu and go to "Software updates". Create a new user account and register your
software (with the "license code" used to unlock the software).
You can now check on a regular basis if there are new versions and download these!
Also you can consult the tutorials and participate in the user forums!
IMPORTANT: Please note that SYNQ only covers the support for the hardware (the controller).
The support of VirtualDJ is exclusively covered by the developers at : www.virtualdj.com!
Upgrading to the PRO-version
After a while using VirtualDJ you will learn about the various
interesting features inside the PRO-version of the program. As
a user of the LE-version you can try the PRO-version for free
during 20days, if you like it (we are sure you will ) you can
buy the upgrade at a discount price. Check the config menu for
more information.
CONFIGURING VIRTUALDJ
Before you can use the DMC2000 with VirtualDJ, you have to configure both. We will configure the
DMC2000 to use it its most flexible way. You will be able to mix tracks from VirtualDJ with tracks from the
internal MP3 players and/or external sources (CD-player, turntable, ...) very easily.
 Put both channel input selectors (46) NOT in MIDI mode otherwise you cannot enter the setup menu.
 Press the LOAD TRACK button (19) for about 3secs to open the setup menu. (also see next chapter for
help!)
 Go to menu option 1. MIDI CH and check if it is set to 01-02-03
 Go to menu option 2. MIDI Setup and check if it is set to TAP = HOLD
 Go to menu option 3.MIXER-mode and check if it is set to NO MIDI
 When these 3 options are correct: press the RECORD CUE-button (25) to close the setup menu and save
your settings.
 Connect the DMC2000 to your PC, using the supplied USB-cable and wait until the drivers are
automatically installed (NO external driver are needed!)
 Put both channel input selectors (46) in MIDI mode.
 Start VirtualDJ and press the CONFIG-button on the screen: the setup window opens
 Press the SOUND SETUP button on the upper part of the VirtualDJ screen, the window below opens:
Make sure that your setup window is identical to the window shown above.
Remark: no headphones are configured, this is normal since VirtualDJ is configured to be used with an
external mixer (the mixer of your DMC2000)
 You are now ready to use the DMC2000 with VirtualDJ.
SYNQ
®
 !!! IMPORTANT !!! 
13/107
OPERATION MANUAL
DMC2000