Setup Menu - SYNQ DMC.2000 Mode D'emploi

ENGLISH
ASIO-drivers:
If you absolutely want to have extremely low latency (delay), you can also experiment with ASIO-drivers if
you like: in that case you can select "ASIO-
driver" for the soundcard. Since this is out of
the scope of this manual, we will not explain
the configuration of the ASIO-drivers here.
USING OTHER DJ-SOFTWARE
Since this controller is designed as a MIDI-compatible device, you can use it to control any Midi DJ-software.
Of course this means that you will need special MIDI-mapping files for these products. Please check our
website: we will provide MIDI-mapping files for some other DJ-software free of charge.
VIRTUALDJ TUTORIALS
VirtualDJ is a very intuitive program so you will easily learn it while trying all possibilities. If you want to learn
more, please check
www.virtualdj.com/wiki/index.html .

SETUP MENU

For maximum flexibility this unit is highly customizable. Therefore a lot of parameters can be set via the
setup menu. To be able to enter the setup menu, the player should NOT be in MIDI mode.
 To enter the SETUP menu, press the LOAD TRACK button (19) for about 3seconds.
 Use the FOLDER knob (16) to browse the different menu options.
 Use the TRACK knob (17) to browse the sub menus (if any)
 Use the JOG WHEEL (22) to change the settings (parameters) of the selected menu option.
To save your settings: choose menu option E (EXIT & SAVE) and press the TRACK knob (17) or
press the RECORD CUE button (25).
1. MIDI CHANNEL: used to set the MIDI-channels of the 3 different parts of the DMC2000. The display
shows 3 groups of 2 digits: 01-02-03:
 First 2 digits: MIDI-channel for the controls of player1 + channel1 of the mixer.
 Second 2 digits: MIDI-channel for the controls of the mixer, except the controls of the 2 input
channels (gain+high/mid/low+fader)
 Third 2 digits: MIDI-channel for the controls of player2 + channel2 of the mixer.
 Turn the TRACK knob (17) to browse the three 2digit groups
 Turn the JOG WHEEL (22) to change the MIDI-channel.
Note: the 3 parts should have different MIDI-channels.
2. MIDI SETUP:
 There are 2 submenus: turn the TRACK knob (17) to select a submenu.
o Submenu 1 – SHIFT button (43) functionality: you can choose how the SHIFT-button
works in MIDI-mode.
 Turn the JOG WHEEL (22) to select the desired setting:
o Submenu 2 – MIDI message display: you can select if the MIDI I/O messages should
appear on the display or not. This can be helpful while making MIDI configuration files.
 Turn the JOG WHEEL (22) to select the desired setting:
3. MIXER-mode: used to switch the mixer between MIDI and non-MIDI mode.
 Turn the JOG WHEEL (22) to select the desired setting:
SYNQ
®
the VirtualDJ website
 TAP = HOLD: similar to the SHIFT-key on your PC-keyboard  the MIDI-
code of a button/knob changes only when you use it while the SHIFT-button
(43) is pressed.
 TAP = TOGGLE : similar to the CAPS LOCK-key on your PC-keyboard 
press the SHIFT-button (43) to turn the shift-function on: as long as the
display shows "SHIFT" the MIDI-code of most buttons/knobs changes so
they get a second (double) function.
 I/O = Hide : don't show MIDI messages that are sent / received
 I/O = DIS. : show MIDI messages that are sent / received
14/107
OPERATION MANUAL
for video tutorials and extra user guides:
DMC2000