Safety Labels; Important - Shindaiwa HomePro 195 Série Manuel D'utilisation

Be Aware of the Working Environment
Avoid long-term
operation in very
hot or very cold
weather.
Be extremely careful
of slippery terrain,
especially during
rainy weather.
If contact is made with
a hard object, stop the
engine and inspect the
cutting attachment for
damage.
Be constantly alert for objects and debris that could be thrown either from
the rotating cutting attachment or bounced from a hard surface.
Figure 2

Safety Labels

Figure 3
4
Always make sure
the appropriate cutting
attachment shield is
correctly installed.
This label indicates the minimum
distance between front handle
and rear grip per ANSI B175.3.
Make sure bystanders or
observers outside the 50-foot
"danger zone" wear
50
FEET
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
When operating in rocky terrain or near electric wires
or fences, use extreme caution to avoid contacting
such items with the cutting attachment.
T195s
F195s

IMPORTANT!

Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
eye protection.