Safety Labels - Shindaiwa HomePro 22T Manuel D'utilisation

Be Aware of the Working Environment
Avoid long-term
operation in very hot or
very cold weather.
Be extremely
careful of
slippery terrain,
especially
during rainy
weather.
If contact is made with a hard object,
stop the engine and inspect the cutting
attachment for damage.
Be constantly alert for objects and debris that could be
thrown either from the rotating cutting attachment or
bounced from a hard surface.
Figure 2

Safety Labels

Figure 3
4
Make sure bystanders or
observers outside the 50-
foot "danger zone" wear eye
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that's
about 16 paces—of an
operating attachment.
Always make sure
the appropriate cutting
attachment shield is
correctly installed.
When operating in rocky terrain or near electric wires
or fences, use extreme caution to avoid contacting
such items with the cutting attachment.
This label indicates the minimum
distance between front handle
and rear grip per ANSI B175.3.
protection.
50
FEET
22T
22F
IMPORTANT!
Safety and Operation Information
Labels: Make sure all information
labels are undamaged and readable.
Immediately replace damaged or
missing information labels. New
labels are available from your local
authorized Shindaiwa dealer.