Cleaning The Product - Sirius S-DD16 ESSENCE Instructions D'utilisation Et Avis De Montage

CLEANING THE
PRODUCT
Careful maintenance ensures proper operation and good performances over time.
The hood must be disconnected from the electrical network, both by unplugging the appliance
from the socket and activating the magnetic circuit breaker (safety cut-out), before removing the
metal grease filters. After cleaning operations, replace the metal grease filters as outlined in the
installation instructions.
MAINTENANCE
External surfaces and
accessories
Activated charcoal
filter with extractable
unit open
Activated charcoal
filter
20
CAUTION
HOW TO PROCEED?
Do not use metallic scrubbers, abra-
sive products, or hard brushes.
After 30 hours of operation, the
downdraft will signal the grease filter
saturation. Saturation is indicated
byflashing RED color LED speed in-
dicator, when the cooker hood is off.
To reset, hold down the timer button
for at least 3 seconds, while the
hood is OFF.
In the recirculation mode, the active
charcoal filter must be replaced pe-
riodically.
To remove the charcoal filter first of all
it is necessary to remove the grease
filter and then pull the plastic key of
the panel itself, in order to disengage
it from its seating.
Follow these steps in reverse order to
insert the active charcoal filter.
Replace the used charcoal filter on an
average of every six months.
EN
ACCESSORY PRODUCTS TO
To clean the external surfaces of the
cookerhood and the light housing
screen use only commercially avail-
able household detergents diluted in
water. Then rinse with clean water
and dry with a soft cloth.
The grease filters can be washed by
hand or in the dishwasher. These fil-
ters need to be cleaned on a regular
basis, because otherwise they may
represent a fire risk.
Refit the grease filters and front pa-
nel, making sure that the panis pro-
perly fitted at the sides so that it it
does not cause the downdraft to stop
operating.
USE
ESSENCE - JOLLY