LawnMaster CLGT1018B01 Guide D'utilisation page 15

OPERATION
Adjusting Power Head Angle (See figs. 22-24)
Adjust the angle of the trimmer head (19) according to the intended operation.
90° or 180° when trimming near edges and walls (Fig. 23, 24).
Fig. 22, initial position 0°
WARNING! Always ensure that the Angle adjustment button snaps in place! Only adjust
to indicated angles! Never adjust to any other intermediate position.
Power Head Tilt Adjustment (See figs. 25-27)
Adjust the trimmer head (19) to a suitable angle (Fig. 25-27). The joint has several snap-in
positions between 0° and 90°.
With guard on ground, place foot on top of guard, adjust tilt by pushing either up or down on the
shaft to tilt.
Fig. 25
Fig. 23, 90°
0°
Fig. 26
15
Fig. 24 , 180°
90°
Fig. 27