Hach AS950 Fonctionnement page 22

Status
Program Halted
Program Complete All of the programmed sample cycles are complete, or the sampling
3. To see more information, push the UP and DOWN arrow keys to select an option, then push
Select.
Option Description
Shows the name of the sampling program, quantity of samples collected and missed
samples and the time until the next sample is collected. When selected, the
information that follows shows:
• Program start time
• Program start setting (Waiting On) (e.g., None, Delay, Schedule or Setpoint)
• Quantity of samples collected
• Quantity of missed samples
• Quantity of samples still to be collected
• Bottle number(s) of the next sample
• Time or counts to the next sample
• Time or counts to the last sample
• Quantity of bottles
• Program stop time
Shows the number of different measurements being recorded, the last time the
measurement(s) were recorded and the percentage of the data log memory that is
used. When selected, the logging interval and the last value recorded for each
measurement shows.
Shows the number of active alarms and the time the most recent alarm occurred.
When selected, the status of all the configured alarms show.
Shows the hardware connected to the sampler. For the AWRS sampler, the cabinet
temperature shows.
4
Shows after the sampling program is complete or stopped.
22 English
Description
The sampling program was stopped temporarily by the user.
program was stopped by the user.
4