Hach AS950 Fonctionnement page 13

6. Select an option, then push OK.
Note: More options show when the optional IO9000 module is connected to the AUX port. Refer to the
IO9000 module documentation.
Option
Log Only
Switch Log
Interval
Figure 2 High setpoint example
1 Measurement value
2 Setpoint trigger on
4.1.5 Sampling program configuration
For flow-based sampling, configure the hardware settings before the sampling program is
configured.
When an alarm is used to control sampling, configure the alarms before the sampling program is
configured.
The sampling program identifies:
• When a sample is collected (pacing)
• The volume of each sample
• The sample distribution among the bottles
• When the sampling program starts
• When the sampling program stops
Complete all the tasks that follow to configure the sampling program. Descriptions of the basic
sampling options are given in this document. For the advanced sampling options (e.g., cascade
sampling and synchronized sampling), refer to the expanded user manual on the manufacturer's
website.
Description
Sets the alarm to be recorded to the alarm log when the alarm occurs.
Sets the data logging interval to change to the secondary logging interval
while the alarm is active. Refer to
3 Setpoint trigger off
4 Deadband
N O T I C E
N O T I C E
Configure data logging
5 Setpoint value
6 Time
on page 11.
English 13