Identifying The Instrument - nVent RAYCHEM TCON-CSD/20 Notice De Mise En Service

1� IDENTIFYING THE INSTRUMENT
The nameplate with information is affixed to the side of the instrument. The supply voltage connected must
correspond to the voltage specified on the nameplate.
All necessary settings are described in these Operation Instructions. However, if any difficulties should still arise
during start-up, you are asked not to carry out any unauthorized manipulations on the unit. This could endanger
your rights under the instrument warranty! Please contact the nearest subsidiary or the head office in such a case.
Please read these operating instructions before commissioning the instrument. Keep the manual in a place that is
accessible to all users at all times. Please assist us to improve these operating instructions, where necessary.
nVent.com/RAYCHEM | 6