nVent RAYCHEM TCON-CSD/20 Notice De Mise En Service page 13

Parameter Meaning
Switch-on delay after power-on
dly
for staggered switch-on of several equipment units.
Minimum ON time
t.On
Minimum OFF time
t.OF
Here you can set the time for which the equipment unit, for instance,
has to remain switched on or off. These values depend on the heating
or cooling unit being used (observe manufacturer's specifications).
In the event of a probe error, the relay is operated immediately as set in
parameter S.Er.
Value range
from...factory-set...to
0 ... 60 min
0 ... 999 s
0 ... 999 s
nVent.com/RAYCHEM | 13