nVent RAYCHEM TCON-CSD/20 Notice De Mise En Service page 14

Alarms
Parameter Meaning
Low alarm limit
Al.L
As soon as the process value falls below this limit, the alarm message
Al.Lis displayed, see Chapter 7 "Alarm messages".
High alarm limit
Al.H
As soon as the process value goes above this limit, the alarm message
Al.His displayed, see Chapter 7 "Alarm messages".
Alarm hysteresis
A.Hy
The hysteresis that was set is below Al.Hor above Al.L.
Alarm suppression time
Al.d
An alarm from Al.Lor Al.His not displayed for this time. If an alarm is
present for longer than Al.d, then it will be displayed.
Response to over/underrange
S.Er
0: relay de-energized
1: relay energized
Value range
from...factory-set...to
-999 ... –200 ... +999
-999 ... 500... +999
-999 ... 1�0 ... +99.9
0 ... 60 min
0, 1
nVent.com/RAYCHEM | 14